NEXEL WARRANTY

NEXEL INDUSTRIES, INC. warrants that all NEXEL products will be free from defects in material and manufacture at time of shipment. We guarantee to replace any item that is found to be defective for up to one (1) year from date of shipment provided that it has been properly used.

NEXEL will repair or replace any product that does not perform as represented herein with normal usage. A NEXEL representative will examine the installation and determine repair or return disposition. Replacements will be shipped prepaid. No returns may be made without written authorization. All warranties are made for the benefit of the original owner under normal usage. There are no other warranties expressed or implied beyond those stated herein. No employee or agent of NEXEL has any authority to make any representation or warranty which exceeds those stated above.

LOAD CAPACITIES FOR SHELVING ( POUNDS PER SHELF )

Wire Shelves up to and including 42" long	800
Wire Shelves over 42" long	600
Wire Shelves over 60" long	400
Flat Steel Shelves = Max. Capacity	400
Wire With Mat Shelves = Max. Capacity	400
Plastic Shelves = Max. Capacity	300

All Shelf Load Capacities are based on the shelf load being Evenly Distributed .

Carts are designed to use 18", 21", 24" Deep Shelves with 63" posts only

Any Questions on shelf capacities or warranties Call 973-584-4269

NEXEL WIRE SHELVING SPECIFICATION SHEET NWS-201

General:
Shelving shall be of the type produced by Nexel Industries. It shall carry the approval of the National Sanitation Foundation (NSF).

Materials:
Shelves shall be bright basic carbon steel wire. Posts shall be cold rolled carbon steel tubing, electric welded.

Finished Chrome:

Shelves and posts shall be finished of brite, high gloss Chrome over nickel electro plating. Or as specified as in Poly-z-Brite, Nexelon, EP Silver Epoxy, 304 Stainless. One year in dry storage application and usage. A Brilliant Chrome Finish for that High-Tech look. Use where appearance and durability is a major factor. Perfect for displays and dry storage.
	Click To View Finishes

Shelves:
Construction shall be of open wire design offering greater light penetration and visibility, lighter weight, air circulation and minimal dust and dirt accumulation.

Fabrication :
Shall be to the following specifications.
Face ribs shall run front to back equally spaced on 13/16 in. centers and to be of 9 gauge (0.148 in.) wire. Each side (four) of shelf shall consist of a corrugated, reinforcing truss of 6 gauge (0.192 in.) wire. At the front and back of the shelf, this corrugated reinforcing truss shall be welded at its top to the face ribs which also shall be welded to a 1/4 in. (0.250 in.) rib wire running perpendicular and above the face ribs. A 1/4 in. (0.250 in.) rib shall be welded to the bottom of the truss. At the ends of the shelf, the corrugated reinforcing truss shall be welded to two parallel 1/4Ó (0.250 in.) wire ribs. Depending on the width and length of the shelf, it shall have three or five longitudinal ribs (0.192 in. wire) welded to the face ribs. In addition, certain longer lengths shall have one or two corrugated reinforcing trusses (0.192 in.) welded to the underside. At each corner of the shelf there shall be a tapered, conical fitting made of 12 gauge (0.104 in.) cold rolled steel welded to the parallel rib supports. The fitting shall be designed to accommodate the vertical supports. The corrugated truss shall be in the shape of the letter N.

Posts:
Shall be of 1in. O. D. round tubing, 16 gauge (0.062 in.) thickness. They shall have rolled grooves spaced at 1in. on centers along their length. The top of the post shall have a finished plastic cap and the post bottom shall have a die cast insert with adjustable leveling foot. At each rolled groove there shall be consecutive numbers starting at the bottom of the post to facilitate installation of clips.

Method of Assembly:
Shall be of the Frusta-Conical design incorporating a two part tapered plastic sleeve. Engagement and locking shall be accomplished with a protruding bead on the inner circumference of the plastic sleeve which will match the groove in the post. Two plastic sleeves shall be attached to each corner post for each shelf. Both the sleeves and the corner fitting of the shelves shall have the identical taper to create a wedge effect, thereby locking the shelf securely in a rigid position. No screws or other fittings shall be required to effect this assembly. Shelves shall be vertically adjustable on 1in. increments.

Packing:
Shelves are packed 4 to a carton except 54 in., 60 in. and 72 in. lengths, which are packed two to a carton. Plastic sleeves are included in each carton. Posts are packed four to a carton.

Freight Classification:
Shelving, steel, NOIBN, KD, flat, rating: 70.

NEXEL WIRE SHELVING MEETS U.S. GOVERNMENT SPECIFICATIONS MIL-S-40144C
AND HAS BEEN APPROVED BY NATIONAL SANITATION FOUNDATION (NSF).

To the best of our knowledge the above represents the
current warranty offered by the manufacturer Nexel Industries Inc.

Parts Orders
March Equipment reserves the right to charge a premium
on small parts orders. Parts orders constitute a courtesy for the
convenience of our customers.

To Access The NexelShelf Home Page
CLICK ON The Button Below

WE ACCEPT VISA - MASTER CARD - AMERICAN EXPRESS & CHECKS

Fax or E-mail your Quotation Requests to sales@nexelshelf.com
We will respond with Price, Shipping & Handling and your
Estimated Delivery Date. Our facsimile quotation will have all
the necessary information we will need to process your order.

Click On Button For Quotation

CALL WHEN YOU'RE READY ( 973 ) 584-4269 OR FAX ( 973 ) 584-6516

E-MAIL sales@nexelshelf.com

NexelShelf.com Is the Internet address of
March Equipment Inc. Box 18 Rt. 206 Flanders, New Jersey 07836
Copyright 1999 March Equipment Inc. All rights reserved.
NEXEL Is the registered Trademark of Nexel Industries Inc.

PLEASE BOOKMARK THIS PAGE